REALISING DREAMS INTO SUCCESS BY JOINING HANDS WITH MHPL   
     
   
     
 
  Our Presses Meet the Challenge of Demanding Rubber      Production Processes

I.The Y83 series hydraulic metal balers press the leftover of all kinds of metal material (steel shavings, scrap steel, scrap aluminium, scrap copper, scrap stainless steel) to be qualified furnace with shape of cuboid, octagon, cylinder and so on, which not only decrease the cost of transportation and smelting, but also increase the speed of casting. The Y83 series hydraulic metal balers are applied in steel factories,recycling industries and ferrous metallurgical works.

II. The features
1.They are hydraulic driven with alternatives of manual or PLC control.
2.Bale-discharging alternatives: turn out, push out, forward or manual

discharing.
3.No footing bolts needed during installation; use diesel engine in replacement when electric power is unavailable.
4.There are ten grades of bailing force from 63 to 400 tons; the productivity ranges from 4 to 40 tons per day.
   
 
     Technical Parameters  
  Hydraulic balers Technical parameters  
 
Type Nominal Force
(KN) 		Compression Box(mm) Bale
Size(mm) 		Bale Density
(kg/m3) 		Capacity
(kg/h) 		Cycle Length
(sec) 		Power
(KW) 		Bale Discharging /Operation
Y83-63 630 1000×600×500 (180-250)×190×190 =1800 500-1000 90 7.5 Turn-out,hand valve control
Y83-100 1000 1000×600×500 (200-300)×200×200/octagon =1800 1000-1200 120 11
Y83-125 1250 1200×700×600
1150×700×600 		(150-400)×250×250/octagon =1800 1000-1500 120 11/15
Y83/T-100 1000 1200×600×600 (250-400)×240×240/octagon =1800 1200-1500 120 15 Push-out,hand valve control
Y83/T-125
Y83/T-125Z 		1250 1200×700×600
1400×700×700 		(250-450)×240×240
(250-450)×300×300 		=1800 1500-2000 80 18.5 Push-out,hand valve control
PLC semi-automatic
Y83Q-135 1350 1050×600×600
1300×600×600 		(50-300)×600×240 =1800 1800-2500 150 18.5
22 		Forward-out,hand value control
Y83-150Y 1500 900×550×500 ?135×500 =1800 500-800 120 15 Manual discharging, electric control
Y83-160 1600 1600×1000×800 (400-600)×350×350
(400-600)×400×400 		=1800 2000-3000 150 22 Turn-out,hand valve control
Y83-160A 1600 1600×1000×800 (400-600)×350×350/octagon
(400-600)×400×400 		=1800 2000-3000 160 22 Push-out,hand valve control
Y83-160B 1600 1600×1200×800 (400-600)×400×400
(400-650)×400×400 		=1800 2000-3000 160 30
Y83-200A 2000 1600×1200×800 (400-700)×400×400 =1800 2500-4000 160 30/37
Y83-200B 2000 1800×1400×900 (400-700)×400×400 =1800 2500-4500 160 30/37 Push-out,PLC control semi-automatic operation
Y83-250A 2500 2000×1400×900 (400-700)×450×450 =1800 3500-4500 160 40/46
Y83-250B 2500 2000×1750×1200 (400-700)×500×500 =1800 3500-5000 160 60
Y83-315A 3150 2000×1400×1200 (400-700)×450×450 =1800 3500-5000 160 60
Y83-315B 3150 2000×1750×1200 (400-700)×500×600 =1800 4000-5000 160 60/66
Y83-400A 4000 2000×1600×1200 (400-700)×500×600 =1800 5000-6500 160 66
Y83-400B 4000 2000×2000×1200 (400-700)×500×600 =1800 5000-7000 160 11
 
     
  Products :    C-frame    H-frame     Pillar Type Presses     Deep Draw Presses     Metal Forming Presses     Trimming Presses     Rubber Presses     Bailing Presses     SMC Molding Presses     Hydraulic Press Break     Single Acting     Double Acting     Teloscopic Cylinder     Hydraulic Power Pac     Hydraulic Manifolds     Special Purpose Machine  
     
 
All Right Reserved © Micro Hydro Technic Pvt. Ltd.
Disclaimer | Powered By : Yen Exall Soft
Home | Contact Us | Feedback